emtriada.blogg.se - Xfinity remote programming prizmo

XFINITY REMOTE PROGRAMMING PRIZMO INSTALL
XFINITY REMOTE PROGRAMMING PRIZMO MANUAL
XFINITY REMOTE PROGRAMMING PRIZMO SOFTWARE
XFINITY REMOTE PROGRAMMING PRIZMO PASSWORD

Check whether normal communication can be made between business module and NMU module.

Ping business module IP to check whether it can communicate.

If you still cannot access the configuration page, please reinitialize NMS server to its factory defaults.

Make sure the IP address of your NMS server is correctly configured.

Power off the 200G transponder.After a while, power it on again.

Try another port on the 200G transponder and make sure the Ethernet cable is suitable and works normally.

Check MGMT ports LED on the 200G transponder and make sure the Ethernet cable is connected properly.

Make sure that all cables are used correctly and comply with the power specifications.Īccessing the Wed-based Configuration Page Unsuccessfully.Check the power cable connections at the 200G transponder and the power source.

XFINITY REMOTE PROGRAMMING PRIZMO MANUAL

NOTE: Refer to the M SERIES NETWORK MANAGEMENT USER MANUAL online for further information.

Step 7: Click login, you are now ready to configure M series platform.

XFINITY REMOTE PROGRAMMING PRIZMO PASSWORD

Step 6: Enter correct user name and password (For the administrator, the default login user name is “root”, and the default password is “public”), as shown in the figure below:.

If you log in from other remote host, enter the server IP address :9090 (IP address of NMS server) to open the login interface.

If you log in from local NMS host, enter localhost:9090 in the address bar to open the login interface.

(Recommend IE11.0 and above version or Google Chrome browser). And then you can close the NMS Server window, the server is still running in the background. Double click “Start NMS Server” to run the server, when it prompts “Please connect your client to the web server on port: 9090”, it means that you have successfully started the NMS server.

Step 4: Then the NMS server interface pops up.

(If you can’t find the license key,please contact FS asles manager for help.)

Step 3: Double Click “NMS Server” icon on the desktop and the dialogue box of license validation will pop up.Enter the license key(included in the CD) to finish validation.

XFINITY REMOTE PROGRAMMING PRIZMO SOFTWARE

Step 2: Get the NMS software from the CD of chassis accessories or deownload the file “NMS software”.Step 1: Connect your computer with the network cable to any Ethernet MGMT port of the NMU module.Connect the other end of cable to a computer.Ĭonfiguring the M Series Platform Using the Web-based Interface.Connect one end of the standard RJ45 Ethernet cable to the MGMT1&2 port on the 200G transponder.Connect the other end of fiber cable to mux demux or optical amplier module. Connect one end of fiber cable to the CFP2 transceiver.Plug the CFP2 transceiver into the CFP2 slot on transponder.Connect the other end of fiber cable to switch.Connect one end of fiber cable to the QSFP28 transceiver.Plug the QSFP28 transceiver into the QSFP28 slot on transponder.

XFINITY REMOTE PROGRAMMING PRIZMO INSTALL

WARNING: Do not install power cables while the power is on. Connect the other end of the power cord to an AC power source.Plug AC power cord into the power port on the front panel of AC power module.Connect the other end of the cable to a proper earth ground, such as the rack in which 200G transponder is mounted.Secure the grounding lug to the grounding point on the chassis front panel with the washers and screws.Connect other end of the ESD wrist strap to the PGND point on the device.

Before touching any device or module, wear an ESD wrist strap or ESD gloves to protect sensitive components against electrostatic discharge from the human body.